Aluminum products Co., Ltd. Zhongshan Ruitai due to production requirements, by the end of 2014 new a production line, and in 2015 came into use. The production line put into operation in the first half of the year, the operating cost control is good, the product quality has greatly improved. At present, Tritace two production lines, to achieve an annual output of 50000 tons of production capacity of round ingot. The new production line in order to meet the demand of high quality ingot and wins, equipped with a new high-end equipment.
Melting furnace, holding furnace with double tilting mode and guarantee the quality of aluminum; the furnace body can also the normal horizontal position on the basis of under tilting 300mm, greatly facilitate the operation personnel to carry out cleaning furnace; melting furnace, holding furnace installed imported RHI air mixing refining system, the system in addition to the gas rate of about 30%, and melting rate increased by 20% or so, temperature of aluminum melt under the uniform control within plus or minus 5 DEG C, the melt composition more uniform. After the furnace gas permeable brick in addition to gas refining of the aluminum melt, and then through the online box in addition to gas treatment, hydrogen content of the basic control in the 0.15ml/100g.Al.
Filtration, Skandia is the first by 80PPi SIVEX filter plate of aluminum melt purification manufacturers; for higher quality requirements of the ingot, the RD22/RE22 Japan metal tube type filter, and the impurity content of the melt control in 0.08mm2/kg below the level.
Ruitai factory on ingot equipment use USN60 flaw detection inspection ensure the safe use of the finished product quality and customer products.
Adhering to the "energy saving and green production" of environmental policy, casting a new a fry ash, cooling and sieving of various automatic aluminum ash handling system, combined with the company's new dust removal system, has greatly improved the company's working environment, reduce the adverse impact on the surrounding environment.

Currently Ruitai new production lines for the production of round billet has mass in the high requirements of the shower room, OPC OPC drum, computer disk arm, automobile with wheel slide, camera, mobile phone panel products, quality reached the top level of the industry.